How to Factory Reset the Projector:
Sanyo Pro xtraX
Press the ‘Menu’ button on either the top of the projector or the remote
Use the right and left arrow buttons (also labeled the ‘volume -’ and ‘volume +’) on either the remote or the projector to go to the settings section of the menu (in the top left corner of the menu, marked with a tool graphic)
Use the up and down arrows on either the remote or the projector to find the ceiling button (marked by a picture of the projector going back into a box with a red arrow, also shown below). Press ‘Select’ twice, the button in the center of the arrows on the remote or to the right of the arrows on the projector.
A menu will pop up stating ‘Return to Factory Default’. Use the up and down arrows to move the red hour to the ‘Yes” button. Press ‘Select’.
Another menu will pop up select ‘Yes” again.
3M Mini Projector
Press the ‘Menu’ button, the small button with a picture of a list to the right of the arrow buttons.
Use up and down arrow buttons to navigate to ‘OSD Reset’. Press ‘Ok’ button, button in the center of the arrow buttons.
A pop up will come up, then use up and down arrows to navigate to confirm. Press ‘Ok’